F6 E1 Error Code Whirlpool Washer - Fixed - Home Guide Corner (2024)

Your Whirlpool washer will display a wide variety of error codes to help you narrow down any existing issues and fix them accordingly. One of these error codes is F6 E1. What does that code mean, exactly?

The F6 E1 error code on a Whirlpool washer may indicate a problem with the motor control unit, a loose wire connection, or software issues. The code may also be caused by a power surge or overloading your washer.

This article will teach you how to fix your Whirlpool washer’s F6 E1 error code. I will also share why this error code appeared in the first place, and how you can prevent other potential issues with your Whirlpool washer.

What the F6 E1 Error Code Means

There are a few possible issues that can lead to the appearance of the F6 error code on your Whirlpool washer. They include the following:

• Faulty motor control unit: This is the most common reason for the F6 E1 error code. As its name suggests, the motor control unit facilitates communication between the central computer and the motor. If something happens to it, the computer cannot communicate with the motor, meaning the machine won’t spin.

• Loose wire connection: You may be looking at a loose connection between the motor control unit and the main control board. If this is the case, you’ll need to check the wiring harness and ensure all the connections are tight.

• Faulty main control board: If you’ve checked the wiring and everything appears to be in order, you may have a faulty main control board. This is a serious problem that requires professional attention.

• Software issues: This is much less common than a hardware issue, but it’s still possible. If you’ve recently updated the software on your smart washer, this could cause the problem.

Causes of the F6 E1 Error Code

I’ve outlined some of the things that the F6 E1 error code on your Whirlpool washer could indicate. But why does it happen in the first place?

Let’s go into the most common reasons the F6 E1 error code appears on your Whirlpool washer:

• Overloading: Going over the recommended load capacity can strain the motor control unit, causing it to fail. I’ve seen control units break after loading a comforter, so I recommend avoiding this at all costs. This is especially true if your washer’s capacity is on the smaller end of the scale.

• Power surge: If there was a sudden power spike, it could damage the motor control unit. This is why using a surge protector with your appliances is always a good idea.

Whether your Whirlpool washer is a top or front loader, I recommend the Lavamatic WS-10521 Electronic Surge Protector for Washing Machine (available on Amazon.com). I like that it flashes specific lights to indicate the amount of voltage your machine is receiving, so you can act quickly before any instability in your power supply damages your washer.

How To Fix the F6 E1 Error Code

Now that you know what the F6 E1 error code means and what causes it, you can easily fix the issue.

Usually, all you need to do is replace the motor control unit. After ordering the right control unit for your appliance, follow these steps:

1. Unplug the washer from the power outlet.
2. Remove the back panel of the washer.
3. Locate the motor control unit. It should be a small white box near the motor.
4. Remove the wires from the old motor control unit and connect them to the new one.
5. Replace the back panel and plug the washer back into the power outlet.
6. Turn on the washer and see if the error code is gone.

If you’re uncomfortable doing this repair yourself, you can always call a professional. They should be able to replace the motor control unit for you and get your washer up and running again in no time.

How To Prevent the F6 E1 Error Code From Appearing in the Future

To prevent the F6 E1 error code from appearing on your Whirlpool washer:

• Don’t overload your washer. There should be enough space between your clothes and the lid of your washer for the clothes to spin around during cycles.

• Keep the area around your washer clean. Lint and other debris can build up over time and cause problems.

• Keep your washer’s software updated. This is especially important if you have a newer model. Whirlpool is constantly releasing new software updates that can fix potential problems.

Related Posts:

• E2 F9 Error Code On Whirlpool Washer – Fixed
• F35 Error Code on Whirlpool Washer
• Whirlpool Duet Washer F24 Error Code

Additional Tips and Tricks for Fixing Whirlpool Washers

If you have a whirlpool washer that’s giving you trouble, here are a few more tips and tricks to help you fix the problem:

1. Check the washing machine’s inlet hose screen for debris. This screen can clog over time, resulting in a slow fill of water or no water at all.

2. Make sure the washer’s legs are level. Otherwise, the washer will vibrate and make too much noise. You might also end up with inaccurate water level readings, which are usually problematic.

3. Inspect the washer’s drive belt for cracks or damage. A broken drive belt can result in motor issues, especially when you’re washing a heavier load.

4. Clean the washer’s lint trap. Left unchecked, excessive lint buildup can result in malfunctions.

5. Check the washing machine’s door seal for cracks or damage. A damaged door seal can leak, which is never a good thing with a washer.

Again, if there are any issues you think you can’t handle on your own, it’s best to ask for professional help.

The Bottom Line

The F6 E1 error code means there’s a problem with the motor control unit. This is the part of the washer that controls the movement of the wash basket. A faulty motor control unit is the most common reason for the F6 E1 error code. Fortunately, replacing the motor control unit is a simple repair you can do yourself.

If you’re uncomfortable performing this repair, you can always call a professional. They should be able to replace the motor control unit for you so you can keep your clothes clean in an efficient manner for a little while longer.